How did you set up the breather tube or overflow system?

I have my 69 tank that I am just going to put a 90* elbow on and run the filler through the hood. But I still have the burper to deal with and make sure that I pass SNORE's requirements for the proper breather..

I run a stock tank and not quite sure what breather your're talking about. My tank vents through the stock filler. If you have the small line on your tank just run 1/8\" line from it to one side of the tank and back then down to the ground. Hope this make sense. Got schooled from A.R.T.S. on this one.

You run the stock older tank, or the newer style (fills from the side instead of from under the hood?? )

I fill from the stock location outside and don't have to open the hood to fill as such with an early tank. I ran the early tank before, made a hole in the hood and it's just more work. My stock setup doesn't leak and I remember smelling gas with the other setup.

good to know, certainly easier..

Glad to help! Now show and shake it down and have some fun!

As long as I have a motor and front shocks I'll be there!!!

...just remember that in the stock config they won't fill very fast, be patient that it fills all the way, and the small breather line sometimes will get a syphon going if its not placed correctly ;-)