|
Welcome,
Guest
|
steering wheel disconnects
(1 viewing) (1) Guest
TOPIC: steering wheel disconnects
steering wheel disconnects 3 years, 2 months ago #8119
|
how are you guys attaching the quick disconnects to the stock column? My splined section is over 3/4 of an inch. Did you turn the stock column down slightly?
adapter?? |
|
Special thanks to
Derek at www.denospeedwerks.com/ Jose at www.dprmachine.com/ www.bakercylinderheads.com/ Mike and Chris at f-o-a.com/ And Greg at www.getpipe.com It is a tale Told by an idiot, full of sound and fury, Signifying nothing. |
Re:steering wheel disconnects 3 years, 2 months ago #8120
|
i dont think a quick disconnect is legal in class 11
|
|
Jeremy Altman
|
Re:steering wheel disconnects 3 years, 2 months ago #8122
|
That is correct, it is not legal in class 11 being you are required to use the stock VW steering colume ONLY!!! Any steering wheel can be used, but all the rest has to be stock VW
|
|
|
Re:steering wheel disconnects 3 years, 2 months ago #8123
|
So how do you attach an aftermarket steering wheel?
A hub adapter? |
|
Special thanks to
Derek at www.denospeedwerks.com/ Jose at www.dprmachine.com/ www.bakercylinderheads.com/ Mike and Chris at f-o-a.com/ And Greg at www.getpipe.com It is a tale Told by an idiot, full of sound and fury, Signifying nothing. |
Re:steering wheel disconnects 3 years, 2 months ago #8125
|
buy an adapter that slips onto the stock shaft
|
|
|
Re:steering wheel disconnects 3 years, 2 months ago #8128
|
what's the difference between a splined adapter and a weld on adapter??
Other than safety.. How could a removable steering wheel be a benefit? This is not making any sense to me.. |
|
Special thanks to
Derek at www.denospeedwerks.com/ Jose at www.dprmachine.com/ www.bakercylinderheads.com/ Mike and Chris at f-o-a.com/ And Greg at www.getpipe.com It is a tale Told by an idiot, full of sound and fury, Signifying nothing. |
Re:steering wheel disconnects 3 years, 2 months ago #8134
|
Our first car and a lot of cars have quick releases. They are NOT legal. You have to use the stock column. Use an adapter from GRANT. Then you can install a 3 bolt style wheel.
|
|
YO'LEVEN Racing #1179
|
Re:steering wheel disconnects 3 years, 2 months ago #8137
|
In my opinion a stock column is not as safe as a one piece solid built column.
|
|
|
Re:steering wheel disconnects 3 years, 2 months ago #8140
|
In my opinion, a stock column is much safer as it has the built in crumple zone to prevent it from becoming a spear right into your chest.
|
|
Jason Gutzmer
#1135 Getting girls wet since 1978 |
Re:steering wheel disconnects 3 years, 2 months ago #8141
|
I am using the stock column...
the disconnect is just an adapter.. why is that illegal? |
|
Special thanks to
Derek at www.denospeedwerks.com/ Jose at www.dprmachine.com/ www.bakercylinderheads.com/ Mike and Chris at f-o-a.com/ And Greg at www.getpipe.com It is a tale Told by an idiot, full of sound and fury, Signifying nothing. |
Time to create page: 0.55 seconds
